Radial vibration transmitter (4-20 mA signal is proportional to pk-pk vibration amplitude)2. It is user-configurable to function as follows:1. MX2034 4-20 mA TransmitterStatic Current Output (mA/ m or mA/mil)MX2034 signal output provides thrust, radial vibration, or shaft speed measurements directly to PLCs, DCSs, SCADA systems, or other instrumentation that accepts an ISA Standard 4-20 mA signal, without the use of a separate monitor system.ĥ The transmitter is a +24 Vdc current loop powered device. It uses -24 Vdc excitation and provides the output signal in mV/ m, typically mV/ m (200mV/mil). Dynamic Voltage Output (mV/ m or mV/mil)MX2033 signal output is compatible with industry-standard continuous vibration Monitoring systems and is in the format specified in API Standard 670. The MX8031 and MX2031 Extension Cables are compatible with both Metrix MX8030 and MX2030 5mm/8mm probes and BN 33XL 5mm/8mm DRIVER OR TRANSMITTERMX2033 3-Wire Probe DriverA driver or transmitter is available, depending on the required signal output format: the MX2033 3-Wire Driver and the MX2034 4-20 mA Transmitter.Ĥ These models are fully compatible with a large variety of probes and cables from Metrix, BN, and other manufacturers including 5mm, 8mm and 11mm types.

The MX2031 comes standard with a coaxial cable and rounded knurled connectors. The MX8031 extension cable comes standard with triaxial cable and VibeLock 5 connector. Both probes offer a full 80 mil (2mm) range, and are designed to offer full API 670 compliance when used with a matching MX8031 or MX2031 extension cable and a MX2033 driver or a MX2034 transmitter.ģ MX8030 and MX2030 probes are fully interchangeable with Bently Nevada (BN)4, 33XL 5mm/8mm & MX2031 EXTENSION CABLESA vailable in a variety of lengths and with optional protective cable armor. The MX2030 comes standard with a coaxial cable and rounded knurled connectors. The MX8030 comes standard with triaxial cable and VibeLock 5 connector. For the first time in our industry, users can configure their transducer system in the field using a custom field-generated curve as well as factory pre-configured calibrations for a variety of probe tip diameters, manufacturers, extension cable lengths, target materials, and linear ranges.Ģ Refer to page two of this Datasheet for additional details on device DPS consists of three elements: a Probe, Extension Cable, and Driver or & MX2030 PROBE SERIES The MX8030 and MX2030 probe series consist of 5mm and 8mm tip diameter probes.

1 Doc# 1087015 DPS November 2018-Rev AD of 10 DIGITAL PROXIMITY SYSTEM (DPS)DatasheetThe Metrix Digital Proximity System (DPS) combines the performance of a fully API 670 compliant eddy-current proximity measurement system with the flexibility of digital configurability.

Emerson csi 2130 usb driver